Telegram bot: advanced
Routes and journeys
Use /route to find every bus between two stops, or the quickest journeys with a change, and save the routes you take often.
answers "which bus gets me from here to there?" It works the same way as the web app's route planner, in a chat.
Build a route
- Send . The bot posts a panel with both ends blank, and a Set start and Set end button, and waits for the start.
- Reply with the start: a stop code, part of a stop's name, or a 6-digit postal code. If several stops match, tap the one you meant. You can also send your location and tap one of the stops nearest you.
- The panel comes back asking for the end. Answer the same way.
Each answer brings a new panel, and the old one loses its buttons, so the live panel is always the latest. Set start and Set end stay on it, so you can change either end later. Send to stop at any point.
Home and Work
π From home, πΌ From work, π To home and πΌ To work on the panel list the stops near the place saved in (see Settings), for you to pick that end from, as a location does. If the place is itself a bus stop, it goes straight in. One that isn't saved yet asks for it; once it's saved, tap the button again.
Direct buses to the other end
Once one end is set, the stops offered for the other do some of the planning for you. Those with a bus straight to your end (or, when you're picking the end, straight from your start) are ticked, listed first, and name the buses:
Opp Bedok Stn Exit A (22222) ~85m Β· 10, 24
with a tick in front of it.
- A name matching several stops: the ticked ones lead the Did you mean list. Every match is checked, so a stop with a direct bus makes the list even if it's well down the alphabet.
- A location, postal code, Home or Work: the ticked ones lead the list of nearby stops, nearest first among themselves.
The message above the buttons says how many there are, or that none of them has one and the finished route will offer journeys with a change. Only a bus heading the right way counts, the same rule as the list of buses below.
Pick a time
The panel starts at π Leave now. Tap it, then Leave atβ¦ or Arrive byβ¦, and send the time: , or , or with a day, or , up to a week ahead. A time with no day that has already passed today means tomorrow. Or tap a quick one, from In 5 min to In 3 h, or π Pick a day and time: tap the day (today to a week ahead), then the hour, then the minutes, in fives. Only times still to come are offered. Leave now on the same menu goes back.
Only buses running at that time are offered, for Leave now as well: a bus counts as running between its first and last bus at your stop, for that day of the week, with public holidays counted as Sundays. A bus that runs the whole way but isn't running then is named at the bottom of the panel, and if none of them is, the bot offers journeys with a change instead.
With a time picked, the panel says when you'd get in or when to set off on the buses that run the whole way, and each journey shows when you'd set off and get in, as 08:30 β 09:05, counting an average 5-minute wait for each bus.
A new , and a route opened from , starts at Leave now again.
Buses that run the whole way
A finished route lists every bus that runs from the start to the end without a change, as a grid four across, your favourite buses starred and pinned. Only a bus heading the right way counts: one that calls at your start and then, later on the same trip, at your end. A loop service counts as far as its interchange, but not past it.
Tap a bus to open the start stop's timings for it, with all the usual buttons and a Back to route button to pick a different bus. The timings also say how many stops the bus has to go to your end.
Journeys with a change
When no single bus links the two stops, the bot offers the quickest five journeys instead. Each is listed in the panel, with its buses, where to change and its time on the move, and has a button of its own.
A journey can take up to three changes, and can include a walk of up to 200 m: to a stop across the road at either end, or between two buses. They are ranked by time riding and walking, plus 6 minutes for each change. If no journey links the stops even with three changes, the bot says so.
At an interchange, terminal or station, a change can also be between any two of its stops up to 400 m apart, such as Tampines Int and Tampines Stn/Int. The walk is timed like any other, so a long one is only suggested when it's worth it. If your first bus goes on into the interchange your next one leaves from, the journey stays on it, unless getting off at the station's stop and walking is clearly quicker.
Tap a journey to see it part by part, with the live timings of each bus at the stop you board it. From the second bus on, the bot estimates when you would reach that stop, strikes through the buses due before then, and bolds the one you would catch. It ends with a rough arrival time for the whole journey.
With a time picked, it starts with when to set off. For a journey setting off more than half an hour from now, each bus says roughly when you'd board it instead of its live timings, which don't reach that far ahead.
Each bus has a button to open that stop's timings for the bus, with Back to journey to return.
A journey across the Causeway has a π step for immigration at both checkpoints, and counts its time: about 15 minutes when it's quiet, up to an hour at the rush. When a bus calls at a stop nearer your end a minute or two further on, the journey stays on to it, rather than getting off early and walking further.
LTA publishes no journey times, so rides are estimated at about 15 km/h along the straight line between stops, and walks at 60 m a minute. Good for comparing journeys; rough as a clock.
The wrong side of the road
The two sides of a road are two different stops, and a bus only calls at the one on its side. When the quickest journey boards or gets off at the stop across the road from one of your ends, and staying put would be at least 5 minutes slower or impossible, the panel says so:
Wrong side of the road? The quickest buses for this trip leave from Opp Waterfront Waves (84631), across the road from your start, ~27 m away.
Tap Use Opp Waterfront Waves instead (or Use the stops across the road, when both ends are wrong) to swap the stop in before you save the route.
Save a route
Tap Add favourite on the panel to star the route. lists your starred routes as buttons labelled ; tap one to reopen its panel, with Back to favourite routes to return to the list.
A route is saved in the direction you set it, so a route and its reverse are two separate favourites. To remove one, open it and tap the favourite button again.